Pianos routinely make movers annual list of products that are most often damaged. Grand pianos are specifically bothersome. Practicing the following treatments for dismantling, cushioning and packing grand pianos will prevent damage, lower claims cost, and improve customer satisfaction.
1) A minimum of three people are needed to handle a child grand piano. If the infant grand piano needs to increase or down stairs or if a complete or show grand piano needs to be transported, a minimum of 4 people are required.
2) Always complete a thorough and precise stock. It may be more suitable or required to utilize a visual inventory to properly explain and show pre-existing damage.
3) As numerous parts are taken apart, please location all hardware in an appropriately identified parts bag and then put the parts bag in a "Components Box".
4) Remove the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a tidy furnishings pad.
5) Detach the cover by eliminating the hinge pins. Have one individual wiggle the lid, holding it opposite the hinge, while a second individual works the pin loose. Please take care not to damage the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a small cloth to help prevent damage to the wood if needed. Wrap the cover in a tidy furnishings pad.
6) Remove the prop that holds the lid open and wrap it in a clean furniture pad. The prop has a hinge pin and remains in 2 pieces.
7) Remove the pedal assembly and cover it in a tidy furnishings pad. The braces at the rear of the assembly rest in slots at each end. When getting rid of the screws, please take care not to drop the braces. In addition, please be especially mindful with the push-rods so that they will not get bent. As you deal with the piano, number the push-rods from delegated right as "1", "2", and "3", by putting a piece of masking tape with the proper number on each rod. Keep in mind: If masking tape is not available, please use correctly identified parts bags for this purpose. When reassembling at destination, please make sure to put the rods in the appropriate order so that the pedals will work properly.
8) Pad the piano by placing a tidy rolled furniture pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to avoid it from flopping open while you imp source handle the piano. Cover the top of the piano with 2 tidy furnishings pads, nicely folded around the keyboard. Use rubber bands to secure the pads. Keep in mind: Please make sure that the surface of the piano is dust-free prior to padding it. Padding a highly refined surface area that is dusty might cause great scratches, particularly on a black lacquer surface.
9) Position a piano board and connect the straps so that it is all set to receive the piano. The raised brace on the piano board ought to be at the keyboard end of the piano.
10) Remove the left front leg by placing one his explanation individual beneath the piano at the left end of the keyboard. Be sure to have two individuals raising the corner of the piano while the third person removes the leg. Keep in mind: Please be sure to keep in mind which legs were eliminated from which positions since some pianos have legs that are not interchangeable.
11) Location the piano on the piano board by reducing the "leg-less" end onto the board. Please be sure to lift the whole piano somewhat while completing this maneuver to avoid undue pressure on the staying, attached legs as the piano suggestions. Raise the piano to an upright position on the board. Note: Please make sure that the soundboard is safe prior to lifting. Make certain that the piano is centered snugly against the brace at the end of the piano board. Keep in mind: Never leave the piano ignored. Constantly have at least one person holding the piano consistent at all times.
12) Eliminate the 2 staying legs and wrap them in tidy furniture pads. These legs are held in place by a "essential and slot" plan. To get rid of the leg, slide it inward towards the center of the piano up until it comes out of the slot.
13) Secure the piano to the piano board by bringing completions of the straps together and attaching them. Location folded burlap pads over the furniture click to read more pads but under the straps to supply extra defense to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, connect the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, use the piano board as a skid. After sufficiently padding the stairs for protection versus house damage, place the keyboard end of the piano toward the bottom of the stairs. Attach a hump strap to the top end of the piano board to avoid the piano from slipping.
16) To fill the piano, leave it on the piano board and location it in a tier as the first base item with the keyboard dealing with the wall of the preceding tier. The finest place to pack the cushioned cover is between the piano and the preceding tier or between the wall and the piano.
Grand pianos represent a significant obstacle, they can be moved without damage by utilizing common sense and practicing the treatments noted above.